Agilent Technologies Multiple Channel Controller 85330A - Manual (Page 59)

85330A Multiple Channel Controller 4-9
General Information
85330A Multiple Channel Controller Characteristics
85330A Multiple Channel Controller
Characteristics
This product is designed for use in Installation Category II and Pollution
Degree 2 per IEC 1010 and 664 respectively.
CAUTION Before switching on this instrument, make sure the line voltage selector
switch is set to the voltage of the mains supply and the correct fuse is
installed. Ensure the supply voltage is in the specified range.
Environmental Limits
Table 4-3 Environmental Conditions for the 85330A
Temperature:
For Operation
For Storage
+
0 to
+
55
°
C (32 to 131
°
F
)
−
40 to
+
70
°
C (
−
40 to 158
°
F
)
Humidity:
For Operation
5% to 95% at
+
40
°
C or less (non condensing)
5% to 95% at
+
65
°
C or less (non condensing)
Pressure Altitude:
For Operation or Storage Less than 4,600 meters (15,000 feet)
Power Requirements:
Line Voltage
Fused at 115 or 230 Vac 50 to 400 Hz
3 A at 115 Vac
1.5 A at 230 Vac
Power Consumption:
85330A only
85330A
+
85331A (all off)
85330A
+
85332A (all off)
85330A
+ 2
85332As (all off)
1
78 VA
88 VA
92 VA
107 VA
1. This is the worst case for a standard system.