Using the create menu – HP Matrix Operating Environment Software User Manual
Page 77
Table 9 Integrity Virtual Server Manager Tools menu options (continued)
More Information
Action Summary
Menu Selection
“Starting, stopping, and deleting virtual
switches” (page 107)
Stops a virtual switch, taking it from
an Up state (powered on) to a Down
state (powered off).
Tools
→Stop Virtual Switch...
.
This menu is enabled only for VMs.
Tools
→Migrate Guest...
“Moving suspend files” (page 103)
.
This menu is enabled only for VMs.
Tools
→VM Move Suspend...
“Opening iLO console” (page 108)
This menu is enabled for VMs and
vPars.
Tools
→Open iLO Console...
“Opening iLO console” (page 108)
This menu is enabled for VMs and
vPars.
Tools
→Open Virtual iLO Remote
Console...
Using the Create menu
The Create menu allows you to create a VM or vPar or virtual switch.
shows the choices
when you select the Create menu.
Figure 55 Integrity Virtual Server Manager Create menu
describes the Create menu options and where to obtain more information in this manual.
More detailed information is provided by the Integrity Virtual Server Manager help.
Table 10 Integrity Virtual Server Manager Create menu options
More Information
Action Summary
Menu Selection
This menu is enabled only for VMs.
Starts the Create Virtual Machine
wizard, which guides you through the
procedure of creating a VM. Each step
presents a dialog that asks you to
specify required information.
Create
→Virtual Machine...
Starts the Create Virtual Partition
wizard, which guides you through the
procedure of creating a vPar. Each
step presents a dialog that asks you
to specify required information.
Create
→Virtual Partition...
“Creating virtual switches” (page 104)
Creates a new virtual network switch
(vswitch) on the VSP. The vswitch is
used by the VMs or vPars to connect
to the network: one or more VMs or
vPars connect to the vswitch, and the
vswitch is connected to a VSP's
physical network device.
Create
→Virtual Switch....
Using the Create menu
77