HP Matrix Operating Environment Software - Manual (Page 104)

1. Select Tools VM Move Suspend. The screen to specify the new directory is displayed, as shown
in
Figure 72
Figure 72 Virtual Machine move suspend
2. To change the default directly, select the Specified directory option and click Browse.
The screen listing all the directories is displayed, as shown in
Figure 73 .
Figure 73 Virtual machine browse directory
3. Select a directory and click Select. The screen goes back to the VM Move Suspend page.
4. The Command Preview field displays the specified directory location.
Click OK to move the suspended files to the specified directory.
Creating virtual switches
Create Virtual Switch menu is applicable for both VMs and vPars. To provide network access for
VMs or vPars, you must create virtual network switches (vswitches) for them. This section describes
how to create a new vswitch on the VSP. The vswitch is used by a VM or vPar to connect to the
network: one or more VMs or vPars connect to the vswitch and the vswitch is connected to a VSP's
physical network device.
104 Working with VMs or vPars