HP Matrix Operating Environment Software - Manual (Page 119)

You can select multiple vPars and apply the required action.
To boot one or more vPars:
1. Click the Virtual Servers tab.
The vPars are listed in this tab.
2. Select one or more vPars by selecting the check box against each required vPars.
3. Select Tools
→Boot virtual partition... from the vPars menu bar.
The Boot virtual partition screen is displayed.
Figure 85 Boot Virtual Partition
The Real Command area displays the vPar commands that are executed to boot the vPars.
4. Click OK to boot the selected vPars.
Stopping vPars
To stop one or more vPars:
1. Click the Virtual Servers tab.
The vPars are listed in this tab.
2. Select one or more vPars by selecting the check box against the vPar.
3. Select Tools
→Stop Virtual Partition from the vPars menu bar.
The Stop Virtual Partition screen is displayed.
Working with vPars 119