HP ProLiant DL380 Server - Manual (Page 33)

CONREP -s (Store to Data file) Example usage for HP ProLiant 100-series servers
To extract the BIOS settings from an SL160z G6 server and save the configuration to an
sl160zconrep.dat
data file:
conrep -s -xconrepSL160zg6_20090728.xml -fsl160zconrep.dat
conrep 3.00 - Scripting Toolkit Configuration Replication Program
Copyright (c) 2007-2012 Hewlett-Packard Development Company, L.P.
System Type: ProLiant SL160z G6
ROM Date : 07/28/2009
ROM Family : O33
Processor Manufacturer : Intel
XML System Configuration : conrep_SL160zg6_20090728.xml
Hardware Configuration : sl160zconrep.dat
Saving configuration data to sl160zconrep.dat.
CONREP Return code: 0
NOTE: The file names after the -x and -f options must be specified, otherwise, the default file
names Conrep.xml and Conrep.dat are used, respectively.
NOTE: A platform specific XML file needs to be used for HP ProLiant 100-series servers. If you
use the default name this may cause an error while running the CONREP utility.
CONREP –l (Load from Data file) Example usage for HP ProLiant 100 series servers
To load the BIOS configuration settings from a previously captured/edited data file (in this case
sl160zconrep.dat
) to an SL160z G6 server:
conrep -l -xconrepSL160zg6_20090728.xml -fsl160zconrep.dat
conrep 3.00 - Scripting Toolkit Configuration Replication Program
Copyright (c) 2007-2012 Hewlett-Packard Development Company, L.P.
System Type: ProLiant SL160z G6
ROM Date : 07/28/2009
ROM Family : O33
Processor Manufacturer : Intel
XML System Configuration : conrep_SL160zg6_20090728.xml
Hardware Configuration : sl160zconrep.dat
Loading configuration from sl160zconrep.dat.
ASM values not set! aborting
CONREP Return code: 0
CONREP Data File Sample Contents for HP ProLiant 100 series servers
A typical data file generated by CONREP is similar to the following:
0e 11 40 80
00
00 08
01
0e 11 ff ff
00
00 78
c1
Using CONREP 33