Asus A8R32-MVP - Manual (Page 95)

A S U S A 8 R 3 2 - M V P D E L U X E A S U S A 8 R 3 2 - M V P D E L U X E A S U S A 8 R 3 2 - M V P D E L U X E A S U S A 8 R 3 2 - M V P D E L U X E A S U S A 8 R 3 2 - M V P D E L U X E 4 - 3 3 4 - 3 3 4 - 3 3 4 - 3 3 4 - 3 3
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.53 (C)Copyright 1985-2005, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
4.4.7 4.4.7 4.4.7 4.4.7 4.4.7 USB Configuration USB Configuration USB Configuration USB Configuration USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press to display the configuration options.
The M o d u l e V e r s i o n M o d u l e V e r s i o n M o d u l e V e r s i o n M o d u l e V e r s i o n M o d u l e V e r s i o n and U S B D e v i c e s E n a b l e d U S B D e v i c e s E n a b l e d U S B D e v i c e s E n a b l e d U S B D e v i c e s E n a b l e d U S B D e v i c e s E n a b l e d items show the
auto-detected values. If no USB device is detected, the item shows
N o n e
N o n e N o n e N o n e N o n e.
USB Configuration
Module Version - 2.24.0-10.4
USB Devices Enabled:
None
USB Controller [USB1.1+2.0]
Legacy USB Support [Auto]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-off [Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
4.4.6 4.4.6 4.4.6 4.4.6 4.4.6 LAN Cable Status LAN Cable Status LAN Cable Status LAN Cable Status LAN Cable Status
This menu displays the status of the Local Area Network (LAN) cable
connected to the LAN (RJ-45) port.
POST Check LAN Cable [Disabled] POST Check LAN Cable [Disabled] POST Check LAN Cable [Disabled] POST Check LAN Cable [Disabled] POST Check LAN Cable [Disabled]
Allows you to enable or disable LAN cable check during POST. When
enabled, the menu reports the cable faults or shorts, and displays the point
(length) where the fault or short is detected. Configuration options:
[Disabled] [Enabled]
POST Check LAN Cable [Disabled]
LAN Cable Status
Pair Status Length
1-2 Open 0.0M
3-6 Open 0.0M
4-5 Open 0.0M
7-8 Open 0.0M
Check LAN cable
during POST.