Asus A8R32-MVP - Manual (Page 139)

A S U S A 8 R 3 2 - M V P D E L U X E A S U S A 8 R 3 2 - M V P D E L U X E A S U S A 8 R 3 2 - M V P D E L U X E A S U S A 8 R 3 2 - M V P D E L U X E A S U S A 8 R 3 2 - M V P D E L U X E 5 - 2 9 5 - 2 9 5 - 2 9 5 - 2 9 5 - 2 9
Creating a RAID 0 configuration Creating a RAID 0 configuration Creating a RAID 0 configuration Creating a RAID 0 configuration Creating a RAID 0 configuration
To create a RAID 0 set:
1.
From the ULI RAID BIOS Setup utility menu, move the cursor to
C r e a t e R A I D 0 S t r i p i n g f o r P e r f o r m a n c e
C r e a t e R A I D 0 S t r i p i n g f o r P e r f o r m a n c e C r e a t e R A I D 0 S t r i p i n g f o r P e r f o r m a n c e C r e a t e R A I D 0 S t r i p i n g f o r P e r f o r m a n c e C r e a t e R A I D 0 S t r i p i n g f o r P e r f o r m a n c e then press .
2. Use the up or down arrow keys to select a drive then press
or . The striped mark “S” appears before a selected drive.
3. Repeat step 2 to select the second drive.
4. The utility prompts the following warning message:
Data on RAID drives will be deleted (Y/N)?
Press to continue or press to return to the menu.
5. Key in a RAID name with a maximum of eight (8) alphanumeric
characters then press . Do not use special characters or
symbols.
6. The utility displays the RAID Array settings at the bottom of the
screen.
Drive Model Mode Capacity RAID Array/Type
Channel 0 Master: XXXXXXXXXXX SATA 2 XXXXX MB RAID A/0x2
Channel 1 Master: XXXXXXXXXXX SATA 2 XXXXX MB
Channel 2 Master: XXXXXXXXXXX SATA 2 XXXXX MB RAID A/0x2
Channel 3 Master: XXXXXXXXXXX SATA 2 XXXXX MB
Capacity RAID Type Stripe Size RAID Name
RAID Array A : XXXXX GB 0X2 16K RAID0
RAID Array B :
RAID Array C :