Agilent Technologies AGILENT U2761A - Manual (Page 95)

Features and Functions 2
U2761A User’s Guide 77
Soft Front Panel Operation
Click Mod and then select ASK as shown in
Figure 2- 26 . To output the ASK waveform, configure the
settings for the carrier frequency, output amplitude, offset
voltage, and ASK rate.
Figure 2-26 Panel view of ASK
Remote Interface Operation
ASKey:STATe {0|OFF|1|ON}
Carrier Waveform
The ASK carrier waveform consists of Sine, Square, Ramp,
Triangle, or Arbitrary waveform. The default waveform is
Sine wave. You cannot use Pulse or DC as the carrier
waveform.
Soft Front Panel Operation
For Arbitrary waveforms, select Arb at the top panel
as shown in Figure 2- 2 and select the desired waveform
from the drop down list as shown in
Figure 2- 16 .