Agilent Technologies AGILENT U2761A - Manual (Page 60)

42 U2761A User’s Guide
2 Features and Functions
Remote Interface Operation
OUTPut {0|OFF|1|ON}
The APPLy command overrides the current setting and
automatically enables the output control.
Set Output Using SCPI Commands
The following SCPI commands show a sample procedure of
generating output.
Example 1, To output a DC voltage
-> *CLS ; *RST //To reset the U2761A to default
power -on state, this command
can be ignored if this operation
is not required.
-> FUNC DC //Sets the output to DC.
-> VOLT:OFFS 1 //Sets the output DC offset voltage
to 1 VDC.
-> OUTP:LOAD INF //Changes the output termination
to infinity.
-> OUTP ON //Turns on output.