Ampro Corporation COM 830 - Manual (Page 83)

Chapter 4 BIOS Setup Description
COM 830 Reference Manual 77
Boot Settings Configuration
Feature Options Description
Quick Boot Disabled
Enabled
If Enabled, some POST tasks will be skipped to speed-up the
BIOS boot process.
Quiet Boot Disabled
Enabled
Disabled displays normal POST diagnostic messages.
Enabled displays OEM logo instead of POST messages.
Note: The default OEM logo is a dark screen.
Boot Display Clear
Maintain
Controls the end of POST boot display handling, if Quiet
Boot is enabled. If set to Maintain the BIOS will maintain
the current display contents and graphics video mode used
for POST display. If set to Clear the BIOS will clear the
screen and switch to VGA text mode at end of POST.
Automatic Boot List
Retry Disabled
Enabled
AddOn ROM Display
Mode Force BIOS
Keep current
Set display mode for Option ROM.
Halt On Error Disabled
Enabled
Determines whether the BIOS halts and displays an error
message if an error occurs. If set to Enabled the BIOS waits
for user input.
Hit 'DEL' Message
Display Disabled
Enabled
Allows/Prevents the BIOS to display the 'Hit Del to enter
Setup' message.
Interrupt 19 Capture Disabled
Enabled
Allows/Prevents the option ROMs (such as network
controllers) from trapping the boot strap interrupt 19.
PXE Boot to LAN Disabled
Enabled
Disable/Enable PXE boot to LAN
Note: When set to 'Enabled', the system has to be rebooted in
order for the Intel Boot Agent device to be available in the
Boot Device Menu.
Power Loss Control
(see note below) Remain Off
Turn On
Last State
Specifies the mode of operation if an AC power loss occurs.
Remain Off keeps the power off until the power button is
pressed.
Turn On restores power to the computer.
Last State restores the previous power state before power
loss occurred.
Note: Only works with an ATX type power supply.