Accton Technology Wireless LAN 802.11b/g Device WN4201B User Manual

Page 74

Text mode
Original mode

Wireless LAN 802.11b/g Device

9.2.2.2 Disable / Enable Wireless

Figure 77: Wireless SoftAP™ dialog box. Tools menu

From the Tools menu it is possible to disable the Wireless SoftAP™ by selecting Disable Wireless
(See figure 77). Once disabled the Wireless SoftAP™ dialog box will display “Station Mode –
Adapter Disabled” under Status as shown in figure 78 below.

Figure 78: Wireless SoftAP™ dialog box; Wireless Disabled

Note:

When wireless is disabled on your HP PC wireless connections will not be functioning nor

can they be established. Wireless must be enabled again in order to connect with other

wireless devices or to re-establish pre-set wireless connections.

Once disabled your Wireless LAN 802.11b/g Device can be re-activated through use of the
same menu as seen in Figure 79 below.

This manual is related to the following products:

Wireless LAN 802.11b/g Device WN4501F