Accton Technology Wireless LAN 802.11b/g Device WN4201B - Manual (Page 28)

Wireless LAN 802.11b/g Device
28
6.2.1 WEP: Setting the Network Key (Network Security)
Securing your Software Access Point enabled network is essential in a wireless network
environment. Security for the Software Access Point is maintained through the following features:
• Support for WPA (WPA-Personal Security (Wi-Fi protected access) AES and TKIP)
• Support for the WEP (Wired Equivalency Protocol)
• Support for MAC address filtering
This section gives instruction on how to correctly set up WEP security on your HP PC. If you are
currently running a WPA enabled device, skip to Section 6.2.2, WPA: Setting the Network Key
(Network Security).
In order to set up your Network Key (WEP security feature) you will need to do the following:
1. Open the Wireless Network Connection Properties dialog box:
• Right click on the Wireless Networks icon in the system tray.
• Select View Available Wireless Networks from the Wireless Networks icon menu.
• Verify that the wireless network you wish to set up security for is highlighted in the
“Available wireless networks” selection box.
• Select Advanced.
Figure 20: Wireless Network Connection Properties dialog box