Accton Technology Wireless LAN 802.11b/g Device WN4201B - Manual (Page 23)

Wireless LAN 802.11b/g Device
23
3. Uncheck the box “The key is provided for me automatically”.
4. Verify that the Network Authentication is set to WPA-PSK.
5. Verify that the Data Encryption is set to TKIP.
6. Input the Network Key of your Access Point, Wireless Broadband Router or Wireless
Gateway.
Note:
A 8 – 63 character alphanumeric key-phrase is necessary when using the WPA interface.
WPA does not require HEX or ASCII notation common with WEP keys. Your WPA
enabled device should already have a 8 – 63 character alphanumeric key-phrase.
Consult the information asked for in section 5.2 .
7. Input the Network Key a second time into the “Confirm network key” box.
8. Select OK.
You are returned to the Wireless Network Connection Properties dialog box and are able to
verify your connection.