Accton Technology Wireless LAN 802.11b/g Device WN4201B - Manual (Page 68)

Wireless LAN 802.11b/g Device
68
9 Station Mode
Note that if Station Mode settings were applied in Windows® XP Wireless Zero Configuration
those settings are still in effect while functioning in Station Mode after Access Point Mode has
been activated.
9.1 Launching the SoftAP™
There are two ways to launch the Software Access Point: Through the SoftAP™ icon in the
system tray of your desktop or through the SoftAP™ icon menu. Either method will bring up the
Wireless SoftAP™ dialog box.
To launch the Software Access Point by using the icon in the System Tray simply left click the icon
once.
Figure 67: Launching; Software Access Point icon
OR
It is possible to launch the SoftAP™ with a right click on the SoftAP™ icon. When a right click is
made on the icon the SoftAP™ icon menu appears. Select Show from this menu to bring up the
Wireless SoftAP™ dialog box.
Figure 68: Launching; Software Access Point icon menu
The Wireless SoftAP™ dialog box appears as shown in figure 69.
Software Access Point
System Tray icon.