Accton Technology Wireless LAN 802.11b/g Device WN4201B - Manual (Page 25)

Wireless LAN 802.11b/g Device
25
6.2 Setting the Network name and Network Security
Your HP PC is functioning in Station or Client Mode by default. After launching the application
(See Section 6.1, Launching the application) you will need to input the Network name and
Network Key. The Network name and Network Key must both be set up for your HP PC to
function with your current network in Station Mode.
Before setting up the Network name and Network Key on your HP PC you must identify this
information on your current wireless network:
•
Network name (SSID)
• Security WPA-PSK Key OR Security WEP Key
The Wireless Network Connection dialog box appears when you have launched Windows® XP
Wireless Zero Configuration:
Figure 17: Wireless Network Connection dialog box
Note: Your Network
name will appear in
the Available wireless
networks box. Any
other listed available
wireless networks
represent the wireless
networks established
within range of your
HP PC. These will
vary and do not
provide secured
access to the internet.