beautypg.com

Touch start/enter, Opening appliance door during operation, Cancel operation – Bosch HMC80251UC User Manual

Page 20: Pizza, Pizza tips, Setting pizza mode for fresh or frozen pizza, The appliance must be turned off, Touch pizza, Setting pizza mode for microwave pizza, Note

background image

20

3.

Touch Start/Enter.
The appliance starts preheating. The set temperature,

the preheat bar and the oven mode FROZEN FOODS

are displayed. The time of day will be permanently

displayed.

The set temperature is reached once the preheat bar has

filled up completely and a beep sounds. Place food in

the preheated oven on the metal tray in a single layer.
To change the temperature during operation, touch

Frozen Food. Type in the new temperature using the

number keys and confirm with Start/Enter.
Opening appliance door during operation
Opening the appliance door during operation will

interrupt the current mode. When you close the

appliance door, operation will be resumed.
Cancel operation
Touch Clear/Off to cancel the active oven mode. The

appliance turns off and the clock is displayed.
The cooling fans may continue to run for a while and then

switch off automatically.

Pizza

You can use the Pizza mode to bake three different types

of pizza:

Pizza tips

For fresh pizza use a pizza paddle for sliding the pizza

on and from the metal turntable.

If using a pizza paddle, sprinkle the paddle liberally

with cornmeal for ease in transferring the dough to the

metal turntable.

Maximum size is 12 inches for fresh and frozen pizzas.

Avoid using a pizza stone as it can damage the oven.

The metal turntable can be used for cutting pizza into

slices. Remove the turntable from the oven after the

pizza is baked.

Setting Pizza mode for fresh or frozen pizza
The appliance must be turned off.
You can set a temperature range from 375 to 450° F

(190 to 230°C) for fresh and frozen pizza modes.
You can bake fresh or frozen pizza directly on the metal

tray turntable.

1.

Touch Pizza.
The display shows SELECT TYPE

-

.

2.

Touch Pizza or +Amount repeatedly to scroll through

all pizza modes.

3.

Touch Start/Enter. For frozen or fresh pizza the

display reads BAKE ON METAL TRAY. The default

temperature and

;

light up on the display.

4.

You can change the temperature by using the number

keys. Touch Start/Enter to confirm.
The appliance starts preheating.

The set temperature is reached once the preheat bar has

filled up completely and a beep sounds.
Opening appliance door during operation
Opening the appliance door during operation will

interrupt the current mode. When you close the

appliance door, operation will be resumed.

Setting Pizza mode for microwave pizza
Place the microwave pizza on the ceramic tray and put it

in the oven following package directions.

1.

Touch Pizza.
The display shows SELECT TYPE

-

.

2.

Touch the number key 3 or touch Pizza or +Amount

repeatedly until MICROWAVE PIZZA is displayed.

3.

Touch Start/Enter. For microwave pizza the display

reads USE CERAMIC TRAY. start/enter is blinking.

4.

Touch Start/Enter again. sensing and the microwave

symbol

Ý

light up on the display.

The appliance starts sensing.

When sensing is complete, a beep will sound and the

calculated cook time will start to count down.
After the cook time has run out a beep will sound. The

appliance turns off and the clock is displayed.
Note: Do not open the door during the sensing

process, or the program will be cancelled. Once the

calculated cook time is displayed you can open the door

to stir, turn or rearrange the food. Touch Start/Enter to

resume operation.
Opening appliance door during operation
Opening the appliance door during operation will

interrupt the current mode. Close the appliance door and

then touch Start/Enter to resume operation.

Mode no. Pizza type

Bake on

1

Frozen pizza

Metal tray

2

Fresh pizza

Metal tray

3

Microwave pizza

Ceramic tray

WHPS

SUHKHDWLQJ

This manual is related to the following products: