Bosch HMC80251UC - Manual (Page 17)

17
Broil
The Broil feature uses intense heat radiated from the
upper element.
You can set two intensity levels:
▯
Broil high (
▯
Broil low *
Setting Broil mode
The appliance must turned off.
1. Touch Broil.
The Broil mode is set to high.
•‚ and start/enter are
blinking, the Broil high symbol ( will be displayed.
The time of day will be permanently displayed in Broil
mode.
2. Touch Broil again or use the +Amount key, to change
to Broil low mode.
–‹ and the broil low symbol * will light up on the
display.
3. Touch Start/Enter to start operation.
You can alternate between Broil high and Broil low
during operation by touching either Broil or +Amount.
Note: Always use a broil pan when cooking in Broil
mode (see optional accessories).
Opening appliance door during operation
Opening the appliance door during operation will
interrupt the current mode. When you close the
appliance door, operation will be resumed.
Cancel operation
Touch Clear/Off to cancel the active oven mode. The
appliance turns off and the clock is displayed.
The cooling fans may continue to run for a while and then
switch off automatically.
Automatic programs
The automatic programs let you prepare food in a fast
and simple way using Microwave and conventional heat.
Select the program and enter the values prompted on
the display, the automatic program selects the optimum
setting for you.
Auto Chef
With Auto Chef you can select from nine different foods.
You only have to enter the weight and Auto Chef
calculates the fastest cooktime for best results.
See program label on the left side of the oven cavity for
available Auto Chef programs.
Note: Only use ovenware that is suited for both
microwave and conventional cooking.
Setting Auto Chef
The appliance must be turned off.
Example: Set Auto Chef for Beef Roast.
1. Touch Auto Chef.
The Auto Chef symbol
` lights up and the display
shows SELECT FOOD ‚ - Š .
2. Select the desired food from the label at the oven
cavity. For Beef Roast touch the number key 4.
-or-
Touch Auto Chef or +Amount repeatedly to scroll
through all Auto Chef modes. When Beef Roast ist
displayed.
‹ . ‹‹ is blinking and the selected food item is shown
on the display.
3. Enter the weight of the food you want to cook using
the number keys. For example, to enter 3 lbs type
3 0 0. The weight and start/enter are blinking.
4. Touch Start/Enter.
Auto Chef will set the appropriate cook time and start
counting down.
During cooking a beep will sound and “Turn food
over” is shown in the display. Open door and turn food
over. Return food to the microwave and touch Start/
Enter.
Once the cook time has run out a beep will sound. The
appliance turns off and the clock is displayed.
VWDUWHQWHU
OEV
OEV PLQ VHF