Canon XEED WUX450 - Manual (Page 89)

89
Setting Display Status (Input Settings)
Oper
ation
Setti
ng Fu
nctio
n
s fr
om Me
nus
Adjusting the Input
Signal
(Horizontal pixels)
> [Input settings] > [Input signal
settings] > [Horizontal pixels]
You can adjust the number of the
pixels in the horizontal direction if
the length of the screen is too long
or too short in the horizontal
direction.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• Perform this adjustment if the Auto PC
function ( P55 ) cannot adjust the projected
image correctly.
Adjusting the Input
Signal
(Vertical pixels)
> [Input settings] > [Input signal
settings] > [Vertical pixels]
You can adjust the number of the
pixels in the vertical direction if the
screen is too long or too short in the
vertical direction.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• Perform this adjustment if the Auto PC
function ( P55 ) cannot adjust the projected
image correctly.
HDMI Component LAN
Digital PC Analog PC USB
Screen
HDMI Component LAN
Digital PC Analog PC USB
Screen