Canon XEED WUX450 - Manual (Page 87)

87
Setting Display Status (Input Settings)
Oper
ation
Setti
ng Fu
nctio
n
s fr
om Me
nus
Adjusting the Input
Signal
(Total dots)
> [Input settings] > [Input signal
settings] > [Total dots]
You can adjust the total number of
dots in the horizontal direction.
Adjust it when stripes are displayed
on the screen.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• Perform this adjustment if the Auto PC
function ( P55 ) cannot adjust the projected
image correctly.
Adjusting the Input
Signal
(Tracking)
> [Input settings] > [Input signal
settings] > [Tracking]
You can fine-tune the timing for
generating an image from the image
signal.
Adjusts the tracking when the image
distorts or flickers.
Use the [ ] / [ ] buttons to select a
value.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• Perform this adjustment if the Auto PC
function ( P55 ) cannot adjust the projected
image correctly.
HDMI Component LAN
Digital PC Analog PC USB
HDMI Component LAN
Digital PC Analog PC USB