Canon imageCLASS MF5950dw - Manual (Page 4)

1-2
Setting the wireless LAN
1.
Press [ ] (Menu).
2.
Press [ ] or [ ] to select, and press [OK].
The next screen is displayed for approximately 5
seconds.
It is not necessary to turn OFF/ON the main
power of the machine here. It will be done on
Step
5
.
3.
Press [ ] or [ ] to select, and press [OK].
4.
Press [ ] or [ ] to select, and press [OK].
5.
After the next screen disappears, turn OFF/ON the
machine.
Network Settings
Select Wired/Wireles
Wireless LAN Settin
...
TCP/IP Settings
SNMP Settings
Select LAN
Wired LAN
Wireless LAN
Turn main power OFF
and ON to enable
Wired/Wireless LAN
selection.
Menu
Network Settings
Preferences
Timer Settings
Common Settings
Changes effective
after main power is
turned OFF and ON.
When the check described on the previous page is completed, switch the connection method to wireless LAN using this
machine.
When the connection method has been changed,
proceed to “ Step3 Selecting a Method for Setting the
Wireless LAN ” on the next page.
It is necessary to turn OFF/ON the machine for the
settings to take effect.
ON
OFF
ON
OFF
Wait for 10 seconds at least
Step2 Switching the Connection Method to Wireless LAN