Canon imageCLASS MF5950dw - Manual (Page 17)

2-7
Troubleshooting
Did you change the wireless LAN routers or access points security settings?
If the following is the case, specify the settings manually.
If followings are the case, change the settings of the wireless LAN routers or access points
To set and operate the wireless LAN router or access points
Please read the instruction manual for the wireless LAN router or access point, or contact the manufacturer of the wireless LAN
router/access point.
e-manual “Network Setting” - “Basic Network Setting”- “Connecting to Wireless LAN” - “Setting
by Manually Entering SSID”
 Stealth function: Enabled
A function that makes the wireless LAN router or access point invisible to the SSIDs on other devices.
 Deny ANY: Enabled
A function that makes the wireless LAN router or access point deny connection when another device’s SSID is set to “Any”
or “Empty.”
 WEP key number to use: Set to a number between 2 and 4.
 WEP key (hexadecimal): Automatically generated by the wireless LAN router or access point
 The MAC address filtering is enabled.
 An encryption method only when communicating using IEEE802.11n: TKIP