Changing fax rx settings, Changing fax rx settings …………………………………………… 78 – Canon FAXPHONE L190 User Manual
Page 78
78
Changing Fax RX Settings
1
Press [
] (Menu).
2
Press [
▲
] or [
▼
] to highlight
3
Press [
▲
] or [
▼
] to highlight
4
Press [
▲
] or [
▼
] to highlight the desired item, and then press [OK].
•
See “Settings for Receiving Faxes.”
RX Function Settings
ECM RX
Incoming Ring
Remote RX
Switch to Auto RX
RX Print Settings
2-Sided Printing
Reduce RX Size
RX Page Footer
Continue Print. When
...
5
Specify the setting values, and then press [OK].
6
Press [
] (Menu) to close the screen.
Settings for Receiving Faxes
Settings
Options
Bold: Default settings
Details
Off
On
The Error Correction Mode (ECM) automatically detects
and corrects errors during fax communication. Using the
ECM function can diminish receive errors even over poor
connections.
Off
On
-
Ring Times: 1 to 2 to 99
(times)
Specify whether or not the external telephone will ring during
an incoming call if <RX Mode> is set to <Auto> or <Fax/Tel
Auto Switch>.
After the external telephone rings for specifi ed times, the
machine automatically starts receiving the fax, if the call is a
fax. If the call is a voice call, the machine rings only when <RX
Mode> is set to <Fax/Tel Auto Switch>.
Off
On
-
Remote RX ID: 00 to 25 to 99
Specify whether or not to remotely instruct the machine to
switch to fax mode when an external telephone is connected.
To send the instruction to the machine, you must dial the
remote RX ID from the external telephone. You can also specify
a remote RX ID.
2
5
Off
On
-
Ring Time till Auto RX: 1 to 15
to 99 (seconds)
Specify how long an incoming call should ring before the
machine automatically switches to fax mode. This option is
available when the receive mode is set to <Manual>.
<2-Sided Printing>
Off
On
Specify whether or not to print documents on both sides of the
paper.