Canon FAXPHONE L190 - Manual (Page 63)

63
Fa
x
Send a Fax
Entering a Fax Number with the Alphanumeric Keys
1
Place your documents (
→
p.19).
IMPORTANT IMPORTANT
If the document guides are too loose or too tight, this may result in
misfeeds or paper jams.
2
Switch to the Fax mode (
→
p.16).
3
Enter the recipient’s fax number with the alphanumeric keys.
Send: Press Start
Destinations: 001
012XXXXXX
RX Mode: Auto
Resolution: 200 x 1
...
4
Press [ ] (Start).
When loading documents
into the feeder Scanning documents starts. The fax is sent after
the scanning is fi nished.
When placing documents
on the platen glass
1. Press [
▲
] or [
▼
] to highlight the size of the
original document, and then press [OK].
2. After placing next page, press [ ] (Start).
•
Press [ ] (Start) for each page.
3. When all pages are scanned completely, press
[
▲
] or [
▼
] to highlight <Start Sending>, and
then press [OK].
If the recipient’s line is busy or an error occurs, the machine automatically
redials the last destination. The default number of reattempts is two, and the
interval between each attempt is two minutes.
To change the default settings, press [
] (Menu)  <Fax TX Settings> 
<TX Function Settings>  <Auto Redial>, and then change the setting
to <On>.
Canceling Fax Jobs
Press [ ] (Stop) twice.
* It is valid when only one job is processing or waiting.