Canon FAXPHONE L190 - Manual (Page 68)

68
Calling a Recipient before Sending a Fax
In the following cases, follow the procedure below to send faxes:
•
If you want to call a recipient before sending a fax
•
If the recipient’s machine cannot receive a fax automatically
To use this function, you must connect the handset or an external telephone
to the machine. If they are not connected, use another telephone to make
sure the recipient to switch the fax mode to receive fax.
1
Place your documents (
→
p.19).
2
Switch to the Fax mode (
→
p.16).
3
Lift the handset or telephone receiver.
•
A dial tone sounds.
4
Dial the recipient’s fax number.
5
Ask the recipient to allow his or her machine to receive faxes.
6
When you hear a beep, press [ ] (Start), and then replace the handset
or telephone receiver.