Receive a fax from memory, Switching to memory lock mode, P.73 – Canon FAXPHONE L190 User Manual
Page 73: Receive a fax from memory ………………………………………… 73, Switching to memory lock mode …………………………………… 73
73
Fa
x
Receive a Fax from Memory
If a fax is stored in memory, you can view the sender of the received fax and print or forward
the fax.
Switching to Memory Lock Mode
1
Press [
] (Menu).
2
Press [
▲
] or [
▼
] to highlight
3
Press [
▲
] or [
▼
] to highlight
and then press [OK].
4
Press [
▲
] or [
▼
] to highlight
[OK].
5
Press [
▲
] or [
▼
] to highlight
6
Set the details as needed.
Register a seven-digit PIN to protect the memory lock
settings.
You can use numbers between "0" and "9," but
cannot register consecutive digits that consist of
only "0" as a PIN.
Set the RX Result Report to print automatically when faxes
are received into the memory.
•
<Off >: Do not print the RX Result Report.
•
<On>: Print the RX Result Report.
To use this feature, you must also activate the
<RX Result Report> item:
[
] (Report) <Reports Settings>
<RX Result Report>
The default setting is <Off >.
Set this feature to receive faxes into the memory only for a
specifi ed time. When the preset time starts, the machine is
switched to receive fax into the memory. When the preset
time ends, faxes stored in the memory are automatically
printed and the memory receiving feature is deactivated.
7
After you have specifi ed the setting, press [
▲
] or [
▼
] to highlight
8
Press [
] (Menu) to close the screen.