Canon FAXPHONE L190 - Manual (Page 70)

70
Using the Machine for Fax Only
Set the fax receive mode to <Auto>.
1
Switch to the Fax mode (
→
p.16).
2
Press [
▲
] or [
▼
] to highlight , and then press [OK].
3
Press [
▲
] or [
▼
] to highlight , and then press [OK].
RX Mode
Auto
Fax/Tel Auto Switch
Manual
Answering Machine
When a Fax or Call Comes In
When a fax comes in, the machine automatically begins receiving the fax after two rings.
If a voice call comes in, the caller will hear a fax tone.
To change the number of rings before the machine receives a fax, press
[
] (Menu)  <Fax RX Settings>  <RX Function Settings> 
<Incoming Ring>  <On>, and then specify the number of rings.
Using the Machine for Faxing and Phoning
Set the fax receive mode to <Fax/Tel Auto Switch>.
1
Switch to the Fax mode (
→
p.16).
2
Press [
▲
] or [
▼
] to highlight , and then press [OK].
3
Press [
▲
] or [
▼
] to highlight , and then press [OK].
RX Mode
Auto
Fax/Tel Auto Switch
Manual
Answering Machine
4
Specify ring settings.
Specify how long the machine will attempt to detect a
fax tone before the handset starts ringing (4-30 seconds).
Specify how long the handset will ring during an
incoming call (15-300 seconds).
Specify how the machine should behave when an
incoming call is not answered:
•
: Disconnects the call.
•
: Receives a fax.
5
After you have specifi ed the setting, press [
▲
] or [
▼
] to highlight
, and then press [OK].