Canon imageFORMULA DR-M140 Document Scanner - Manual (Page 27)

27
How to Place Documents
Switching the Feed and Eject
Methods
Switch the feed and eject methods based on the type of document you
are scanning.
Standard feeding is used to feed documents one page at a time. Non
separation feeding is used to feed bound or fastened multi-page
documents or folded documents without separating them.
Feed and Eject Methods for Different Document Types
Hint
When scanning documents that contain both plain paper and plastic
cards, place the cards at the top and use the straight path.
The U-turn path is used when the straight path tray at the rear of the
scanner is closed, and the straight path is used when it is opened.
U-turn path Straight path
Standard feeding is used when the feed selection lever at the front of the
scanner is lowered, and non separation feeding is used when it is raised.
Standard feeding Non separation
feeding
Document type
Feed
method Eject
method
Remarks
Plain paper Either Either
Business cards Either
Straight
path
Place cards vertically.
Plastic cards Either
Straight
path
Embossed cards
must be placed
vertically one card at
a time. Up to three
non-embossed cards
can be placed at one
time (either vertically
or horizontally).
Thick paper Either
Straight
path
Thin paper Either Either
Bound or
fastened paper
(e.g., invoices) Non sepa-
ration
feeding
Either
Long
documents
Non sepa-
ration
feeding
Either
Half-folded
paper
Non sepa-
ration
feeding
Either
0-00-DR-M140_RG_UK.book Page 27 Monday, August 8, 2011 5:15 PM