Canon PowerShot ELPH 140 IS - Manual (Page 35)

35
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Still Images
Continuous Shooting
Hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see “Continuous Shooting
Speed” (
=
115 ).
1 Configure the setting.
z z
Press the <
m> button, choose
[ ] in the menu, and then choose [
W]
(
=
22 ).
z z
Once the setting is complete, [
W] is
displayed.
2
Shoot.
z z
Hold the shutter button all the way down
to shoot continuously.
• Cannot be used with the self-timer (
=
32 ).
•
Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
•
As more shots are taken, shooting may slow down.
• Shooting may slow down if the flash fires.
Still Images Movies
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. When
the camera is not in use, the screen quickly darkens to reduce battery
consumption.
1 Configure the setting.
z z
Press the <
q> button several times until
[ ] is displayed.
z z
The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
z z By pressing the <
q> button again, [
] is
displayed, and Eco Mode is deactivated.
2
Shoot.
z z
To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.