Canon PowerShot ELPH 140 IS - Manual (Page 14)

14
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
3
Set the home time zone.
z z Press the <
q> buttons to choose
your home time zone.
4
Finish the setup process.
z z
Press the <
m> button to complete the
setting. The setting screen is no longer
displayed.
z z
To turn off the camera, press the power
button.
•
Unless you set the date, time, and home time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
•
To set daylight saving time (1 hour ahead), choose [ ] in step 2 and then
choose [ ] by pressing the < o>
buttons.
Changing the Date and Time
Adjust the date and time as follows.
1
Access the camera menu.
z z Press the <
n> button.
2
Choose [Date/Time].
z z
Move the zoom lever to choose the [
3]
tab.
z z
Press the <
o>
buttons to choose
[Date/Time], and then press the <
m>
button.
3
Change the date and time.
z z Follow step 2 in “Setting the Date and
Time” (
=
13 ) to adjust the settings.
z z
Press the <
n> button to close the
menu.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a
charged battery pack or connect the camera to an AC adapter kit (sold
separately,
= 82 ), even if the camera is left off.
•
Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Set the correct date and time as
described in “Setting the Date and Time” (
=
13 ).