Deactivating the flash – Canon PowerShot ELPH 140 IS User Manual
Page 33
33
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Still Images
Movies
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1
Choose [
$].
z
z
Following step 1 in “Using the Self-Timer”
(
), choose [
$] and press the
<
n> button.
2
Configure the setting.
z
z
Press the <
o>
buttons to choose
[Delay] or [Shots].
z
z
Press the <
q>
value, and then press the <
m> button.
z
z
Once the setting is complete, [
$] is
displayed.
z
z
Follow step 2 in “Using the Self-Timer”
(
) to shoot.
•
For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
•
When you specify multiple shots, image brightness and white balance are
determined by the first shot. More time is required between shots when the
flash fires or when you have specified to take many shots. Shooting will stop
automatically when the memory card becomes full.
•
When a delay longer than two seconds is specified, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp will
remain lit in case the flash fires.)
Still Images
Deactivating the Flash
Prepare the camera for shooting without the flash as follows.
z
z
Press the <
r> button several times until
[
!] is displayed.
z
z
The flash will no longer be activated.
z
z
To activate the flash, press the <
r>
button again. ([
] is displayed.) The
flash will automatically fire in low-light
conditions.
•
If a blinking [
] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.