Canon EOS C300 - Manual (Page 26)

26
You can save up to 5 different network configuration profiles. You can select which one to use
depending on where you plan to use the camcorder. If you just saved a new network
configuration (A 18), the camcorder will automatically connect to that Wi-Fi network and this
procedure is not required.
1
Open the Wi-Fi [Select] submenu.
[w Other Functions] > [Wi-Fi Remote] > [Select]
2
Select the desired configuration
number and then press SET.
Connections via an access point
(Infrastructure): The camcorder will connect to
the network using the configuration just saved.
The icon will appear on the upper left of the
screen, first in yellow while connecting and then in
white when the connection is established. In the
rear panel, the bars of the icon indicate the
strength of the Wi-Fi signal.
AP mode/Ad Hoc connections: After the
icon turns white, the camcorder is ready to
connect directly to the Wi-Fi enabled device.
Perform the procedure to connect the device
(A 18).
Selecting a Configuration Number
COP
Y