Canon EOS C300 - Manual (Page 15)

15
Manual Setup/AP Mode/Ad Hoc Connection
AP Mode Connections
4
Select the channel and then press SET.
Available channels will be different for 11b/g/n and
11a/n connections.
5
Select the AP mode’s encryption
method and then press SET.
If you selected [Open/No encryption], skip to step
7. If you selected [WPA2-PSK/AES], continue with
step 6.
Ad Hoc Connections
4
Select the channel and then press SET.
Available channels will be different for 11b/g and
11a connections.
5
Select the Ad Hoc connection’s
encryption method and then press SET.
If you selected [WEP], continue with step 6.
If you selected [No encryption], skip to step 7.
Infrastructure Connections
4
Select the Wi-Fi network’s
authentication method and then press
SET.
If you selected [Shared Key], skip to step 6.
5
Select the Wi-Fi network’s encryption
method and then press SET.
If the authentication method is [Open], you can
select [WEP] and continue to step 6, or [No
encryption] and skip to step 7.
If the authentication method is [WPA-PSK] or
[WPA2-PSK], you can select [TKIP] or [AES].
COP
Y