Canon EOS C500 PL - Manual (Page 11)

Playing Back and Developing Clips
11
NOTES
• Use a computer with a GPU supported by this software to develop clips. Although it is possible to
develop clips using a computer that does not have a GPU supported by this software, it is not
recommend to do so. For the latest information on this software, including system requirements, visit
your local Canon Web site.
• Development settings cannot be changed while playing back a RAW clip.
• You cannot adjust the sharpness of RAW clips that were recorded in HRAW recording mode
(4096x1080, 3840x1080)
White Balance Shift -10.0 to 10.0
(0.0) Allows you to adjust the white balance shift using the
slider or by directly entering a value (in increments of 0.1).
You can click K to return the setting to its default value.
Sharpness 0 to 10 (0) Allows you to adjust the sharpness using the slider or by
directly entering a value (in increments of 1). You can click
K to return the setting to its default value.
View Gamma Canon Log,
Rec. 709,
Wide DR Selects the gamma setting for development that will be
applied during playback of a RAW clip. This setting will be
applied to the preview panel and the picture output
through the SDI terminal (0 13).
Quick Development Off, On When exporting a RAW clip or during playback pause
mode, processing is simplified to shorten the
development time. Because some processes such as
false color reduction will not be implemented, the color
and resolution will differ from the result obtained using
normal development. During playback, quick
development is always enabled, regardless of this setting.
Setting Setting options Function
COP
Y