Canon VB-S800D - Manual (Page 154)

154
S311 Working error in external input/output service
[err]
S312 Working error in timer service [err]
S410 Event service initialization error [crit]
S411 External input/output service initialization error
[crit]
S412 Timer service initialization error [crit]
S413 Timer service runtime error [crit]
„ RTP-related Messages
R001 Startup of RTP distribution module [info]
R002 Stopping of RTP distribution module [info]
R003 RTSP PLAY request received [info]
Description cannot work extio [%1] [%2] [%3] (S311)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the external input/
output device service was running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description cannot work timer [%1] [%2] [%3] (S312)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in the timer service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description event initialization error [%1] [%2] (S410)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
event service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description extio initialization error [%1] [%2] (S411)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
external input/output device service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description timer initialization error [%1] [%2] (S412)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
timer service.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description timer working error [%1] (S413)
%1 Error number
Meaning An error occurred while the timer service
was running.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description starting media_plane (R001)
Meaning RTP distribution module started.
Description stopping media_plane (R002)
Meaning RTP distribution module stopped.
Description PLAY received: client_IP=%1, profile=%2,
num_of_sessions=%3(V=%4,A=%5,
M=%6,BC=%7) (R003)
%1 Client IP address
%2 Profile name of requested PLAY
%3 Total number of client sessions
%4 Total distribution count of Video stream
%5 Total distribution count of Audio stream
%6 Total distribution count of Metadata stream
%7 Total distribution count of
AudioBackChannel
Meaning RTSP PLAY request was received.