Canon VB-S800D - Manual (Page 140)

140
(3) [Intelligent Function (Volume detection)]
The volume detection status is displayed. When
sound that meets the criteria selected under [Event] >
[Volume Detection] in the Setting Page is detected,
the icon turns green (p. 56).
Example:
Volume Detection status ON
Recording to a Memory Card Manually
Video displayed in the Admin Viewer can be manually
recorded to a memory card.
Note
• To record on a memory card, a memory card must be inserted
in the camera (p. 125) and [Save Logs and Videos] must be
selected in the setting page > [Memory Card] > [Operation
Settings].
• The format and size of the video recorded on a memory card
depends on the settings made on the Setting page.
Video format: [Memory Card] > [Video Format]
Video size: JPEG [Video] > [JPEG] > [Video Size: Upload /
Memory card]
H.264 [Video] > [H.264(1)] > [Video Size]
„ Recording Videos Manually
The [Start/Stop Memory Card Recording] button
appearance changes as shown below depending on
recording status.
„ Confirming Manually Recorded Video
Use the Recorded Video Utility (p. 112) to confirm video
manually recorded to a memory card.
Click the [Recorded Video Utility] button to start the
Recorded Video Utility from the Admin Viewer.
1 If you have not yet obtained the camera control
privileges, click the [Obtain/Release Camera Control]
button and obtain the control privileges.
2 Click the [Start/Stop Memory Card Recording] button.
Not recording
Recording
3 To stop video recording, click the [Start/Stop Memory
Card Recording] button again.
Important
Recording to the memory card will be terminated when the
length of manually recorded videos exceeds 300 seconds from
the time recording started.