Canon VB-S800D - Manual (Page 148)

148
Log Messages on the Camera
Log messages are classified into the following types.
Note
If no content is recorded in a log for approximately two hours, “--
MARK --” will be recorded in the message area.
„ Application (Camera) Messages
W001 Starting and stopping of system [info]
W030 Startup and shutdown of WebView Livescope
Client [info]
W031 Transmitted video data size [info]
W040 Clearing to external memory [info]
W101 Invalid user name [notice]
W102 Invalid password [notice]
W130 Buffer recovered [notice]
W201 Invalid panorama image [warning]
W230 Buffer overflow [warning]
List of Log Messages
Category Level Code Fault level
crit Error 4xx Software-level failure
(Task operations will
stop)
err Error 3xx Operational error
(Operations will
continue)
warning Warning 2xx Non-operational error
notice Warning 1xx Error external to the
system
info Information 0xx Information on normal
operation
Description %1 webview (W001)
%1 Starting or stopping
Meaning wvhttp server (webview) has started or
stopped.
Description %1%2 host=, user=, prio=<
Priority>(W030)
%1 W: WebView session, V: Session-less video
client, N: Session-less event client
%2 +: Connect, -: Disconnect
Meaning The camera server client was connected or
disconnected.
Description %1= host=, user=,
video=:
(W031)
%1 W: WebView session, V: Session-less video
client
Meaning When a client disconnected, the total data
that was sent to the client displayed in
number of frames.
Description %1 the image storing - %2 (W040)
%1 Starting or stopping
%2 Reason for starting/stopping
Meaning Started or stopped clearing stream
recording to external memory.
Description user not found (W101)
Meaning The camera was accessed by an
unauthorized user.
Description user password mismatch
(W102)
Meaning The password is invalid
Description stream buffer recovered (W130)
Meaning Video buffer for stream recording has
recovered.
Description corrupt panorama image - ignored (W201)
Meaning Panorama image information acquisition
failed.
Description stream buffer overflowed (W230)
Meaning The video buffer for the stream recording
overflowed and video was discarded.