Application (camera) messages – Canon VB-S800D User Manual
Page 152
152
V420 Could not start intelligent service [crit]
V421 Intelligent service error [crit]
Application (Memory Card) Messages
M001 Starting and stopping of memory card control
module [info]
M203 Not enough space on memory card [warning]
M204 Invalid file removed [warning]
M301 Memory card control module error [err]
Application (Camera) Messages
C001 Starting and stopping of camera control module
[info]
C002 Camera application started [info]
C201 Day/Night mode switching warning [warning]
C211 Camera control command overflow [warning]
HTTP Server Messages
H143 User name specification error [notice]
H144 Password specification error [notice]
Description
intelligent initialization error [%1] [%2] .
(V420)
%1
Error number
%2
Cause of error
Meaning
Failed to initialize intelligent service.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description
intelligent working error [%1] [%2] . (V421)
%1
Error number
%2
Cause of error
Meaning
An error that does not permit recovery
occurred while intelligent service was
running.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description
%1 sdctrl (M001)
%1
Starting or stopping
Meaning
The memory card control module (sdctrl)
has started or stopped.
Description
There is not available space (M203)
Meaning
Insufficient memory card capacity.
Description
Invalid file %1 was removed. (M204)
%1
Name of removed file
Meaning
An invalid file was removed.
Description
%1 process failure (M301)
%1
mount or unmount
Meaning
Mount or unmount process failed.
Description
%1 camerad (C001)
%1
starting | stopping
Meaning
The camera control module started/
stopped.
Description
starting cameraappl (C002)
Meaning
The camera application started.
Description
Can’t switch Day/Night mode, because
current mode is Auto. (C201)
Meaning
Could not switch day/night mode.
Countermeasure
Set Day/Night mode manually.
Description
command queue overflowed (C211)
Meaning
The camera control command queue
overflowed, and some commands were
discarded.
Countermeasure
Allow a longer interval (200 ms) for sending
the camera control command.
Description
(http_auth.c.XXX) get_password failed,
IP:%1 (H143)
%1
IP address
Meaning
An unknown user was specified in user
authentication.
Description
(http_auth.c.XXX) password doesn't match
for %1 username%2, IP:%3 (H144)
%1
URL XSS vulnerability countermeasure
implementation (process equivalent to ftpd)
%2
User Name
%3
IP address
Meaning
A wrong password was specified in user
authentication.