Information, Input source information display, Information maintenance and cleaning – Canon LV-7392A User Manual
Page 64

64
Input Source Information Display
The Information Menu is used for checking the status of the image signal being projected and the
operation of the projector.
H-sync freq.
V-sync freq.
Lamp counter
Information Menu
The horizontal frequency of the input signal is
displayed in
KHz, or - - - - KHz when no signal.
The vertical frequency of the input signal is
displayed in
Hz, or - - - - Hz when no signal.
Numbers of Hz doubles when during Interlace.
The cumulative lamp operating time is displayed.
Press the INFO. button on the remote control
unit to display the Information Menu.
LV-RC06
INFO. button
Remote control unit
Press the Point ▲▼ buttons to select the
Information. The Information Menu is displayed.
See below for displayed information.
Power management mode
Aspect
Off, Standby or Exit, and Timer are displayed.
The selected Screen size is displayed.
Input
Lamp status
The selected input source is
displayed.
The selected lamp mode is displayed.
Language
The selected language is displayed.
Key lock
The selected Key lock icon is displayed.
PIN code lock
Off or On 1 or On 2 is displayed.
Remote control
The selected remote code is displayed.
Direct Operation
Menu Operation
SERIAL NO.
The serial number of the projector is displayed. The
serial number is used to service the projector.
Information
Maintenance and Cleaning