Brother MFC-9030 - Manual (Page 64)

Making Copies 55
COPIER
Out of Memory Message
If the memory becomes full while you’re making copies, the screen displays
If you were scanning the first page to be copied, press Stop/Exit to cancel the operation and restart
to make a single copy. If you were scanning a subsequent page, you will have the option to press
Copy to copy the pages scanned so far—OR—Press Stop/Exit to cancel.
You will need to clear some fax messages to make some additional memory available before you
can continue.
Temporary Copy Setting
You can quickly enlarge or reduce copies or improve the copy
quality by using the Enlarge/Reduce, and Options keys.
These settings are temporary, and the machine returns to its
default settings when you finish copying.
Copying Using Multiple Settings
You can try different combinations of settings for the best results.
After you finish settings using the Enlarge/Reduce or
Options keys the LCD shows:
■ Press
or if you want to select additional settings.
—OR—
Press Copy if you are finished choosing settings.
Making Enlarged or Reduced Copies (Temporary Setting)
1
Insert the document face down in the ADF.
2
Using the dial pad, enter the number of copies—OR—Keep the default (01).
3
Press Enlarge/Reduce.
4
Press or to choose an enlargement or reduction ratio.
You can reduce to 71% or 50% of the original size by pressing key.
—OR—
You can enlarge to 141%, 150%, 200% by pressing key.
—OR—
You can press or to select MANUAL and press Menu/Set, then use the dial pad to
enter an enlargement or reduction ratio between 50% and 200%. For example, press 5, 3 to enter
53%.
To gain extra memory, you can turn off Fax Storage—OR—Print fax messages in
memory. (See Setting Fax Storage, page 50.)
OUT OF MEMORY
PRESS COPY OR
FOR NEXT OPT.