Brother MFC-9030 - Manual (Page 146)

Troubleshooting and Maintenance 137
MAINTENANCE
4
Wait to unpack the new drum unit until immediately before installing it. Place the old drum unit
into the aluminium bag and discard it according to local regulations.
Discard the used drum unit according to local regulations. Be sure to seal the drum
unit tightly so toner powder does not spill out of the unit. When discarding used
drum units, keep them separate from domestic rubbish.
• Do not pull or force the starter sheet from the machine. It will be ejected
automatically.
• Wait to unpack the drum unit immediately before installing it into the
machine.
• If an unpacked drum unit is subjected to excessive direct sunlight or room
light, the unit may be damaged.
• Handle the toner cartridge and the drum unit carefully because they
contain toner. If toner scatters and your hands or clothes get dirty,
immediately wipe or wash with cold water.
• Do not touch the scanner window with your finger.
Aluminium
Bag
New Drum Unit
Old Drum Unit
Starter Sheet
Do NOT remove
the Starter Sheet!