Brother MFC-820CW - Manual (Page 40)

Chapter 3
24
Setting the backlight
brightness
3
You can adjust the brightness of the LCD
backlight. If you are having difficulty reading
the LCD, try changing the brightness setting.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose
LCD Settings.
Press OK.
d
Press a or b to choose Backlight.
Press OK.
e
Press a or b to choose Light, Med or
Dark.
Press OK.
f
Press Stop/Exit.
Setting the Dim Timer for the
backlight
3
You can set how long the LCD backlight stays
on after the last key press.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose
LCD Settings.
Press OK.
d
Press a or b to choose Dim Timer.
Press OK.
e
Press a or b to choose 10 Secs,
20 Secs, 30 Secs or Off.
Press OK.
f
Press Stop/Exit.
Setting the Off Timer
3
You can set how long the LCD stays on after
the last key press. This is a power saving
feature. The machine can print, scan and
receive faxes and voice calls when the LCD is
off.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose
LCD Settings.
Press OK.
d
Press a or b to choose Off Timer.
Press OK.
e
Press a or b to choose 1 Min,
2 Mins, 3 Mins, 5 Mins, 10 Mins,
30 Mins or Off.
Press OK.
f
Press Stop/Exit.
Note
When the display is off you can press any
key to turn it back on.