Brother HL-S7000DN - Manual (Page 20)

20
For Wireless Network Users
Setup using the Installation CD-ROM and temporarily using a USB
cable (Windows
®
only)
12
Setup the wireless
settings
a
Put the installation CD-ROM into your
CD-ROM drive. If prompted, select your
language.
b
Click Install Printer Driver and then click Yes
if you accept the license agreement.
c
Choose Wireless Network Connection and
then click Next.
d
Choose Brother Peer-to-Peer Network
Printer or Network Shared Printer, and then
click Next.
e
Choose Yes, I have a USB cable to use for
installation, and then click Next.
• You need to temporarily use a USB cable
during configuration (cable not included).
• If you are using Windows ® XP, or using a
network cable to connect your computer
with your wireless access point/router, you
need to know the SSID and Network Key of
your WLAN access point/router you wrote
down in step
11-a on page 18 before you
proceed.
• If you use your machine in an IEEE 802.1x
supported wireless network, see Using IEEE
802.1x authentication in the Network User’s
Guide.
Note
If the Brother screen does not appear
automatically, go to Computer (My Computer),
double-click the CD-ROM icon, and then
double-click start.exe.
Note
For Windows Vista ® and Windows ® 7 users,
when the User Account Control screen
appears, click Allow or Yes.
Note
If you want to install the PS driver (BR-Script3
printer driver), choose Custom Install and then
follow the on-screen instructions.
Note
• If you choose Network Shared Printer,
choose your machine’s queue, and then click
OK.
• Choose the option of the Firewall setting, and
then click Next.
Note
If the Important Notice screen appears, read the
notice. Check the box after you confirm the SSID
and Network Key, and then click Next.