Brother HL-S7000DN - Manual (Page 10)

10
Macintosh
USB
For USB Interface Cable Users
10
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
b
Connect the USB cable to the USB port
marked with the
symbol on your machine,
and then connect the cable to your Macintosh.
c
Make sure your machine’s power switch is on.
11
Install the printer driver
a
Put the installation CD-ROM into your
CD-ROM drive.
b
Double-click the Start Here OSX icon.
c
Choose Local Connection (USB) and then
click Next. Follow the on-screen instructions.
d
Choose your machine from the list, and then
click OK.
e
When this screen appears, click Next.
Note
• For users of Mac OS X 10.5.7 or lower,
upgrade to Mac OS X 10.5.8 - 10.7.x. (For the
latest drivers and information for the Mac OS X
you are using, visit
http://solutions.brother.com/.)
• If you want to add the PS driver (BR-Script3
printer driver), please go to the Brother
Solutions Center at
http://solutions.brother.com/ and visit FAQ’s on
your model page for instructions.
Note
It may take a few minutes for the installation to
complete.
Note
When the Brother Support screen appears,
follow the on-screen instructions.
Finish
The installation is now
complete.