Brother MFC J6510DW - Manual (Page 48)

Chapter 4
34
c
You can change the following fax
sending settings. Press FAX and then
press a or b to scroll through the fax
settings. When the setting you want is
highlighted, then press d or c to choose
your option, and press OK.
(Basic User's Guide)
For details changing the following fax
sending settings, see pages 35 to 36.
 Glass ScanSize
 Color Fax Transmission
 Preview Outgoing Fax
 Transmission Verification Report
(Setup)
(Advanced User's Guide)
For more advanced fax sending
operations and settings, see Chapter 3
Sending a fax in the Advanced User’s
Guide:
 Contrast
 Fax Resolution
 Set New Defaults
 Factory Reset
 Faxing at End of Call
 Broadcasting
 Real Time TX
 Overseas Mode
 Delayed Fax
 Batch TX
 Canceling Waiting Jobs
 Polled Transmit
d
Enter the fax number.
Using the dial pad
Using the Phone Book
 Phone Book
Using call history
 Outgoing Call
 Caller ID hist.
Note
You can preview a fax message before
sending it by setting Fax Preview to ON.
(See How to preview an outgoing fax
on page 35.)
e
Press Black Start or Color Start.
Faxing from the ADF
 The machine starts scanning the
document.
Faxing from the scanner glass
 When you press Black Start, the
machine starts scanning the first
page.
Do one of the following:
• To send a single page, press 2 to
choose No(Send) (or press
Black Start again).
The machine starts sending the
document.
• To send more than one page,
press 1 to choose Yes and place
the next page on the scanner
glass. Press OK. The machine
starts scanning the page. (Repeat
this step for each additional
page.)
 If you press Color Start, the
machine starts sending the
document.
Stop faxing
4
To stop faxing, press Stop/Exit.