Brother MFC J6510DW - Manual (Page 30)

Chapter 2
16
Note
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
g
Close the paper tray cover.
h
Slowly push the paper tray back into the
machine.
i
Do one of the following:
 If you are using Ledger, Legal or A3
size paper, go to step j.
Note
When you are using large size paper in
Tray #2, you may need to extend Tray #1
out over Tray #2 to prevent printed pages
from falling off the output tray.
 If you are using Letter, Executive or
A4 size paper, go to step m.
j
Pull tray #1 out of the machine.
Press the universal guide release
button (1) as you slide out the front of
the paper tray.
k
Open the output paper tray cover and
adjust the paper length guide (1) for the
paper.
1
A4
1