Brother MFC-230C - Manual (Page 160)

Network Scanning (For models with built-in network support)
154
12
Scan to OCR
12
When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh
®
you
designated on your network. ControlCenter2 will activate the OCR software installed on your Macintosh
®
(Presto!
®
PageManager
®
) and convert your document into text for viewing and editing from a word
processing application on the designated Macintosh
®
. You can change the Scan configuration. (See OCR
(word processing application) on page 139.)
a
Load your document.
b
Press the (Scan) key.
c Press a or b to choose Scan to OCR.
Press OK.
d Press a or b to choose the destination Macintosh
®
you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
Macintosh
® on the control panel.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the
cursor, then use a or b to enter the second digit. Repeat until you have entered all four digit of the PIN
number. Press OK.
e
Press Black Start or Color Start.
The machine starts the scanning process.
Note
• Presto!
®
PageManager
®
must be installed on your Macintosh
®
.
• You can’t choose color Scan type for this function. Black Start or Color Start do not change the settings.