Brother MFC-230C - Manual (Page 134)

Scanning
128
10
Scan to File
10
You can scan a black and white or a color document into your Macintosh
®
and save it as a file in the folder
you choose. The file type and specific folder are based on the settings you have chosen in the Scan to File
screen of the Brother MFL-Pro ControlCenter2. (See File on page 141.)
a
Load your document.
b Press the (Scan) key.
c
Press a or b to choose Scan to File.
Press OK.
d
Press Black Start or Color Start.
The machine starts the scanning process.
Note
• If you want to change between color and black and white scanning, choose color or black and white in the
scan type option on the Device Button tab of the ControlCenter2 configuration screen. (See
SCAN on page 135.)
• If you would like to change the file name of scanned documents, enter the file name in File Name section
on the Device Button tab of the ControlCenter2 configuration.
• Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change
the settings.
Scan to Media (Not available for MFC-230C)
10
You can scan black and white and color documents directly to a USB Flash memory drive or memory card.
Black and white documents will be stored in the PDF (*.PDF) or TIFF file formats (*.TIF). Color documents
may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. File names are based on the current date. For
example, the fifth image scanned on July 1, 2007 would be named 07010705.PDF. You can change the color,
quality and file name.
Note
DCP models cannot change the file name.
Resolution File Format Options Default File Format
200x100dpi B/W TIFF / PDF TIFF
200dpi B/W TIFF / PDF TIFF
150dpi Color JPEG / PDF PDF
300dpi Color JPEG / PDF PDF
600dpi Color JPEG / PDF PDF