Brother MFC-9330CDW - Manual (Page 42)

Chapter 2
28
Acceptable paper and
other print media
2
Print quality may vary according to the type of
paper you are using.
You can use the following types of print
media: plain paper, thin paper, thick paper,
thicker paper, bond paper, recycled paper,
labels, envelopes or glossy paper (see Print
media on page 198).
For best results, follow these instructions:

DO NOT load different types of paper in
the paper tray at the same time because it
may cause the paper to jams or misfeed.

For correct printing, you must choose the
same paper size from your software
application as the paper in the tray.
 Avoid touching the printed surface of the
paper immediately after printing.

Before you buy a lot of paper, test a small
quantity to make sure the paper is
appropriate for the machine.

Use labels that are designed for use in
laser machines.
Recommended paper and
print media
2
To get the best print quality, we recommend
using the paper in the table.
Type and size of paper
2
The machine feeds paper from the installed
paper tray or the manual feed slot.
The names for the paper trays in the
printer driver and this Guide are as
follows:
2
Paper Type Item
Plain Paper Xerox 4200DP 20 lb
Hammermill Laser Print
(24 lb=90 g/m
2
)
Recycled Paper No specific brand
recommended
Labels Avery laser labels white
#5160
Envelopes No specific brand
recommended
Glossy Paper NewPage Futura Laser Gloss
80 lb Text (118 g/m
2
)
Xerox Digital Color Elite
Gloss
Tray and optional unit Name
Paper Tray Tray 1
Manual Feed Slot Manual