Brother MFC-9330CDW - Manual (Page 174)

160
Network
(continued)
Wi-Fi Direct
(continued)
PIN Code — — — You can easily
configure your
Wi-Fi Direct™
network settings
using WPS with a
PIN code.
Manual — — — You can manually
configure your
Wi-Fi Direct™
network settings.
Group Owner — — On
Off *
Sets your machine
as the Group
Owner.
Device
Information
Device Name — — You can see the
device name of
your machine.
SSID — — Shows the SSID of
the Group Owner.
When the machine
is not connected,
Touchscreen
shows
Not
Connected .
IP Address — — You can see the
current IP Address
of your machine.
Status
Information
Status — G/O Active(**)
Client Active
Not Connected
Off
Wired LAN Active
** = the number
of devices
You can see the
current Wi-Fi
Direct™ network
status.
Signal — Strong
Medium
Weak
None
You can see the
current Wi-Fi
Direct™ network
signal strength.
When your machine
acts as the Group
Owner, the
Touchscreen
always shows
Strong .
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions
See Network User's Guide.
Visit the Brother Solutions Center to download the Wi-Fi Direct™ Guide at http://solutions.brother.com/.
Visit the Brother Solutions Center to download the Web Connect Guide at http://solutions.brother.com/.
The factory settings are shown in Bold with an asterisk.