Brother PT-2410 - Manual (Page 93)

89
UNDERLINE FUNCTION
You can add emphasis to your text by underlining it or striking it out.
The default underline setting is OFF. When the Underline function is set to ON or STRIKE-
OUT, the Undl/Frm indicator on the right side of the display lights up.
To change the underline setting:
1 While holding down , press once, and keep held down to display the
current underline setting.
2 While still holding down , continue pressing until the desired underline set-
ting is displayed.
☞
The Undl/Frm indicator lights up when the ON or STRIKEOUT setting is selected.
3 Release to apply the selected underline setting to the text.
EXAMPLE
ON STRIKEOUT
To select the ON underline setting:
1 While holding down , press
once, and keep held down.
2 While still holding down , con-
tinue pressing until ON is dis-
played.
3 Release .
Code Code
Underline
%
5
Underline
%
5
Code Code
Code Code
Underline
%
5
Underline
%
5
Code Code
O F F
U N D E R L I N E Alt
Caps
Width
Length
A.Format
Undl/Frm
Length
Code Code
Underline
%
5
Underline
%
5
Code Code
O N
U N D E R L I N E Alt
Caps
Width
Length
A.Format
Undl/Frm
Length
Code Code
Underline
%
5
Underline
%
5
Code Code